Ionized Hydrogen Peroxide (iHP)

Superior Life Sciences Disinfection & Decontamination

iHP EXPLAINED

STEP 1

iHP explained-Step 1

7.8% Hydrogen Peroxide Bit™ Solution converts to iHP™ after passing through a cold plasma arc.

STEP 2

iHP explained- Step 2

iHP™ is carried thought the mist, moving like a gas throughout the treated area.

STEP 3

iHP explained-Step 3

iHP™ damages pathogenic organisms through oxidation of proteins, carbohydrates and lipids.

STEP 4

iHP explained-Step 4

iHP™ cellular disruption and/or dysfunctions occur and allows for disinfection and decontamination in the targeted area.

iHP™ Technology Efficacy

Independent testing had proven six-log (99.9999%) efficacy against the gold standard for sterilization, Geobacillus stearothermophilus and Bacillus atrophaeus – a notoriously difficult to kill spore.

With this development, further EPA testing had placed it on the following Lists:

LIST G: Norovirus
LIST H: MRSA
LIST K: C. difficile spores
LIST L: Ebola
LIST M: H1N1
LIST N: Emerging Pathogens, Including SARS-CoV-2 Coronavirus

iHP™ Features Efficacy Against:

  • Pseudomonas
  • H1N1 (Influenza A Virus)
  • Salmonella
  • C. diff (Clostridium difficile) Spores
  • Geobacillus Stearothermophilus Spores
  • Staphylococcus
  • Norovirus
  • Mold & Mildew
  • MRSA
  • Adenovirus
EPAlist-DIN-OMRI

Complete Fogging Decontamination System

lonized Hydrogen Peroxide can achieve 6-log organism reduction on:

Bactericide
Virucide

Application time: taking only 5 seconds per square foot to apply.
Contact time to disinfect: 7-minute.
Does not damage equipment so rooms do not need to be emptied. Even highly technical equipment can be left out.
Does not leave any toxic residue. There is no need to wipe or rinse surfaces. Can reach the entire room, leaving no surface untreated by human error and is even effective on hard-to-clean surfaces.
Easy to integrate with cleaning procedures.
Is validated to comply with Good Manufacturing Practice (GMP) standards.

iHP Efficacy on Biological Organisms

Efficacy Against 42 Molds and Fungi

Utilizing proven iHP™ technology, we are able to provide a 106 reduction of viruses, spores, and fungi. The results are summarized in the following table. In the following table spore loads for the referenced fungi were reduced from 107 spores/ cm2 to undetectable levels in 15 seconds.

Aspergillus expansumGeotrichum candidumPenicillium roquefortii
Aspergillus parasiticusMemnoniella echinataPenicillium verrucosum
Aspergillus restrictusMucor racemosusPenicillium brevicompactum
Aspergillus sydowiiMycothecium verrucariaRhizopus stolonifer
Aspergillus tamariiPaecilomyces lilacinusScopulariopsis asperula
Aspergillus terrusiPaecilomyces variotiScopulariopsis brevicaulis
Aspergillus ustusPenicillium atramentosuScopulariopsis brumptii
Aspergillus versicolorPenicillium cluysogenumScopulariopsis chartarum
Aspergillus wentiiPenicillium citrinumStachybotrys chartarum
Cladosporium cladoporiodes
Type 1
Penicillium corylophilumTrichoderma hamatum
Cladosporium cladosporiodesPenicillium crustosumTrichoderma harzianum
Cladosporium herbarumPenicillium glandicola TTrichoderma longibranchiatum
Cladosporium sphaerospermenPenicillium griseofulvumUlocladium chartarum
Eurotium arnstelodamiPenicillium olsoniiWallemia sebi

Efficacy Against Microbial Pathogens

Utilizing proven iHP™ technology, we are able to provide a 106 reduction of viruses, spores, and fungi.

OrganismClassificationLog ReductionLab
Bacillus atrophaeus *Bacterial Spore>8.31
Geobacillus stearothermophilusBacterial Spore>6.33/6
Bacillus subtilisBacterial Spore>6.01
Clostridium difficile spores ***Bacterial Spore>6.03/6
Escherichia coliGram Negative>7.42
Pseudomonas aeruginosa ***Gram Negative>6.05/6
Serratia marcescensGram Negative>6.03
Salmonella enterica ***Gram Negative>5.57
Staphylococcus aureus ***Gram Positive>7.42/6
Methicillin-resistant Staphylococcus aureus (MRSA) ***Gram Positive>5.96
Bacillus atrophaeus vegetative cellsGram Positive>9.01
Asperigillus NigerMold>8.04
Aspergillus speciesMold>7.02
Cladosporium speciesMold>7.02
Pencillium speciesMold>7.02
Stachybotrys chartarumMold>7.04
Trichophyton mentagrophytesMold>6.04
Human rhinovirus 16 **Virus>6.83
Influenza A (H1N1) ***Virus>106
Norovirus ***Virus>6.47
AdenovirusVirus>5.87

FAQ

What is Vibraclean Bio Decontamination Service?

Vibraclean Bio Decontamination Service is a fully inclusive and managed decontamination solution that uses Hydrogen Peroxide Vapour to eradicate microorganisms from the environment. It can be used for a multitude of reasons. Learn more here.

Will I have to close the whole building during this process?

Typically all adjacent areas can remain occupied with no disruption to your other working areas. We will also monitor the exterior of the area during decontamination as part of our safety procedures.

Is my space too large or difficult to decontaminate?

Whether you have operational and logistical concerns or the scope of the project is expansive, we will most likely be able to meet your decontamination needs thanks to the adaptability and scalability of Vibraclean Bio Decontamination Service.

Can I leave my equipment in the area?

Yes – and we encourage you to do so. Equipment that has been removed will then have to be put back, adding extra work and risk of introducing a contaminant.

How long will it take for Vibraclean to decontaminate my area for me?

Each situation is unique and we will work with you to provide an accurate assessment according to our knowledge from experience.

What type of documentation do I receive with this service?

Vibraclean Bio Decontamination Service is supported by documentation including full site surveys, safety information, risk assessment, method statement, detailed reporting confirming results and more.

Can you decontaminate equipment only with this service?

Absolutely. Please contact us to discuss further.